RoRo shipping of highway trucks is the optimum way to transport them anywhere in the world. This includes rigid frame or articulated trucks. There is no safer or more cost effective alternative. All trucks we ship via RoRo are stowed below deck so they are not subjected to sea weather.
The RoRo ships we use are designed to handle trucks and vehicles efficiently and are equipped with loading ramps so they can be driven on and off with ease. On board the vessel they are securely lashed onto the ship’s deck.
RoRo shipping of trucks is by far the best and only way to go.
Operational working height must be considered at the time of booking. If a unit can be lowered at the time of securing but must be raised during manoeuvring, then the upper height must be the declared height at the time of booking. Failure to declare such heights may result in cargo being short shipped.
High vehicles that extend beyond front or rear axles may also present problems if taken to a deck with only minimal clearance as shown in the illustration below. It may be possible to load such a unit successfully and then to experience problems at the discharge port. It is important that you advise Depth RoRo of the maximum height of the cargo together with overhang distances from axles so that consideration can be carefully given to stowage and deck heights.
Vehicles must be presented for shipment in good running and self-starting order with fully functioning steering and braking systems including parking brakes.
All tyres should be inflated to the manufacturer’s recommended operating pressure. Any cargo with flat or cut tyres will be refused by the carriers.
Vehicles should have sufficient fuel load to allow for loading and discharge operations, and potential standby idling time. We suggest that a fuel load be at least 10% but no more than 25% for this purpose.
Any fuel and oil leaks must be fixed before delivery of the cargo for shipment. Carriers can reject vehicles with leaks on safety and environmental grounds. If leaks occur during transit, carriers can charge cleaning fees for the vessel and terminal.
On the day of vessel loading, mechanical assistance cannot be guaranteed if your vehicle will not start. Most carriers are able to provide some basic jump start assistance but this cannot be relied upon.
If the vehicle is complicated to operate and/or has electrical isolation switches, the shipper must provide detailed operating instructions inside the cabin and to the Depth RoRo operations team before delivery to the port. The operating instructions should also include a 24 hour phone number for technical support if required.
Tank trucks that are used must have a certificate evidencing they have been de-fueled or de-gassed.
Non-operating vehicles can sometimes be shipped on MAFI Trailers. However, freight will be calculated at the static cargo rate.
No personal effects or inner cargo are allowed in any vehicle by most carriers. Only items defined as standard equipment of the vehicle such as a toolbox, spare tyre, manuals are generally allowed. Depth RoRo can approach carriers at the time of booking with a special request, however detailed packing lists and proper declaration to Customs and notations on the bill of lading will be required if the carrier accepts this.
LPG (Liquid Petroleum Gas) vehicles are acceptable as self-drive RoRo cargo provided that the fuel tank cylinder is attached as a permanent fixture of the vehicle.
Some countries have stringent Quarantine Regulations so vehicles must be delivered for shipment in a very clean condition. These regulations can include re-export of your cargo at your expense. Brown Marmorated Stink Bug is another significant quarantine risk that must be dealt with prior to shipment of RoRo cargo during the season. Depth RoRo can assist with pre-shipment cleanliness inspections (if required), washing and fumigation of cargo in most main ports, however extra charges for these services will apply.
Freight is calculated on the overall dimensions of the cargo. To keep your freight costs to a minimum, it is important to reduce the dimensions where possible. As long as it doesn’t impact the safe and reliable operation of the cargo, parts or accessories such as radio aerials, beacon lights, exhaust stacks, or any other protrusions should be removed, cylinders retracted, and mirrors turned in. This is a non exhaustive list and are examples of what you need to consider when presenting your cargo for shipment.